A. The size and shape of lots shall be in conformance with any zoning regulations effective in the area of the proposed subdivision and shall not be less than the regulations specified therein, but in no case shall any lot have a depth of less than seventy-five feet. The planning commission may grant exceptions to these provisions where there are unusual topographic conditions, curved or cul-de-sac streets or other special conditions. In unclassified districts, the planning commission shall specify the size and shape of all lots in conformance with the use proposed.

B. The side lines of all lots, so far as possible, shall be at right angles to the street which the lot faces, or radial or approximately radial, if the street is curved.

C. Front building setback lines shall be indicated by dotted lines on the subdivision map, as required by the planning commission.

D. No lot shall be divided by a city boundary line.

E. Lots without a minimum seventy-foot frontage on a dedicated street as required by Section 16.08.135 of this code will not be permitted.

F. Lots, other than comer lots, may front on. more than one street only where necessitated by topographic or other unusual conditions.

G. No cut or fill slope shall be steeper than one-half to one. (Ord. 90-14 (part), 1990; Ord. 90-1 (part), 1990)