16.08.135 Type I and Type II subdivisions—Minimum lot frontage and minimum lot area.
A. Type I. A Type I subdivision is one in which all parcels are brought to a finish grading standard as set forth in the Uniform Building Code and this title, with street, water, sewer, utility, drainage and street light improvements in place.
B. Type II. A Type II subdivision is one in which street, water, sewer, utility, drainage and streetlight improvements are in place but in which parcels are left in an ungraded condition.
|
Minimum Lot Sizes by Ground Slope and Subdivision Type |
||
|
Cross-slope |
Minimum Lot Frontage (feet) |
Minimum Lot Area (sq. feet) |
|
Type I Subdivision |
||
|
0%-5% |
70 |
7,000 |
|
6%-10% |
75 |
7,500 |
|
11%-15% |
80 |
8,000 |
|
16%-20% |
90* |
9,000 |
|
Over 20% |
100* |
11,500 |
|
Type II Subdivision |
||
|
0%-5% |
70 |
7,000 |
|
6%-10% |
80 |
8,500 |
|
11%-15% |
100** |
10,000 |
|
16%-20% |
120** |
12,000 |
|
Over 20% |
140** |
15,000 |
*Tentative map shall be accompanied by preliminary grading plan.
**Tentative map shall be accompanied by preliminary grading plan showing possible driveway alignments with grades of less than fifteen percent from back of sidewalk onto each lot.
(Ord. 90-14 (part), 1990; Ord. 90-1 (part), 1990)